Your First Simulated Flight
Once the IDE is installed, follow these steps to run your first simulation.
1. Create a New Project
Open the IDE and click New Project. Select a preset drone (we recommend the 5-inch Freestyle preset for beginners).
2. Configure Your Drone
The visual configurator lets you swap components from the catalog. Each change updates the physics model in real time.
3. Launch the Simulator
Click Simulate in the toolbar. The 3D environment loads with your configured drone ready to fly.
Default Controls
| Action | Keyboard | Gamepad |
|---|---|---|
| Throttle up | W | Left stick up |
| Throttle down | S | Left stick down |
| Yaw left | A | Left stick left |
| Yaw right | D | Left stick right |
| Pitch forward | Up arrow | Right stick up |
| Pitch back | Down arrow | Right stick down |
| Roll left | Left arrow | Right stick left |
| Roll right | Right arrow | Right stick right |
Tips for Beginners
- Start in Stabilized mode — the FC auto-levels the drone
- Use the Slow Motion toggle (Space) to practice precise maneuvers
- Check the Telemetry Panel to see battery voltage, motor temps, and GPS data
Last updated: March 15, 2024